APPLICATION:
RISER CLAMPS ARE RECOMMENDED FOR THE SUPPORT AND /OR RESTRAINT OF VERTICAL STEEL PIPES.
A RISER CLAMP IS DESIGNED TO ATTACH TO THE PIPE AND TO REST ON A STRUCTURAL MEMBER OR FLOOR
IT IS NOT DESIGNED TO HAVE HANGER RODS ATTACHED TO IT TO SUPPORT THE PIPE.
CONSTRUCTION:
RISER CLAMPS CONSISTS OF TWO CARBON STEEL FLAT BARS BENT TO SHAPE AND HELD TOGETHER BY TWO BOLTS. DESIGNED TO ACT AS A RIGID SUPPORT OR GUIDE FOR VERTICAL PIPES. THE CLAMP SHOULD BE BOLTED TO THE PIPE JUST BELOW SUPPORT LUGS OR OTHER ATTACHMENTS THAT CAN CARRY A SHEAR LOAD.
MATERIAL:
STEEL. ALSO OTHER MATERIALS CAN ALSO BE PROVIDED ON REQUEST .
MAXIMUM TEMPERATURE:
343°C (650°F)
FINISH AVAILABLE:
PLAIN, HOT DIP GALVANIZED, ELECTRO-GALVANIZED.
Product Code |
Nominal Pipe Size |
Pipe OD |
Length between Hole Centre (mm) |
Bolt Size |
MAX LOAD |
|
| In. | mm | |||||
| ASK – RC 0.50 | ½” | DN15 | 21.3 | 57 | M10 | 1250 |
| ASK – RC 0.75 | ¾” | DN20 | 26.7 | 68 | M10 | 1250 |
| ASK – RC 01 | 1” | DN25 | 33.4 | 76 | M10 | 1250 |
| ASK – RC 1.25 | 1 ¼” | DN32 | 42.1 | 90 | M10 | 1250 |
| ASK – RC 1.50 | 1 ½” | DN40 | 48.2 | 110 | M10 | 1250 |
| ASK – RC 02 | 2” | DN50 | 60.3 | 130 | M10 | 1850 |
| ASK – RC 2.50 | 2 ½” | DN65 | 73.0 | 142 | M12 | 1850 |
| ASK – RC 03 | 3” | DN80 | 88.9 | 161 | M12 | 2250 |
| ASK – RC 04 | 4” | DN100 | 114.3 | 190 | M12 | 3600 |
| ASK – RC 06 | 6” | DN150 | 168.3 | 258 | M16 | 4500 |
| ASK – RC 08 | 8” | DN200 | 219.1 | 333 | M16 | 4500 |
| ASK – RC 10 | 10” | DN250 | 273.0 | 409 | M16 | 5800 |
| ASK – RC 12 | 12” | DN300 | 323.8 | 467 | M20 | 7300 |
| ASK – RC 16 | 16" | DN400 | 406.4 | 583 | M20 | 7300 |
| ASK – RC 20 | 20" | DN500 | 508.0 | 708 | M20 | 13400 |
| ASK – RC 24 | 24" | DN600 | 609.6 | 833 | M20 | 13400 |